The German Company, Grenzebach BSH, supplies complete plants for defibrating recovered paper (preferably newsprint) to obtain a highgrade, ecological and easy to handle building insulating material with optimised building biology features. The key component of our technology is a Whirlwind Mill, which provides particularly fluffy, optimally defibrated flocks that contain only very small amounts of dust (broken fibres). The bales of paper are fed to a shredder which reduces it to pieces the size of a stamp and separates the sheets. A downstream magnetic separator removes metallic contaminants from the paper flow before the latter enters the Whirlwind Mill. Together with the paper, flameproofing agent is fed to the mill in metered quantities.
In the grinding clearance of the Whirlwind Mill the paper shreds are further torn apart and at the same time fully defibrated. The special design of the Whirlwind Mill rotor creates strong swirls in the grinding clearance which turn the fibres into loosened, fluffy flocks. During the defibration process the flame-proofing salts are pulverized in the mill and deeply embedded in the cellulose fibers. The grinding air discharges the finished insulating material from the Whirlwind Mill and pneumatically conveys it into a baghouse separator. Most of the grinding air is run in circulation mode, which minimizes any emissions. The insulating material is stored in a bin and then conveyed to an automatic packers ystem with weighing unit.
Cellulose insulating material is an ecological building material free from any health risk. It has optimised technical characteristics and building biology properties and complies with the latest legal requirements and regulations. The Grenzebach BSH Whirlwind Mill provides for complete defibration and stable, large-volume flocks with long fibres. A high content of supporting fibres enhances the incorporation of the flame-proofing agent and the mechanical strength of the flocks. The insulating material obtained in this way has an extraordinarily high volume stability, i.e. the insulation will not shrink, as is the case with mineral fibres after some time.
Cellulose insulation materials produced using the Grenzebach BSH technology stand out for their extremely low dust content. Due to the very simple but also very effective design, the plants are easy to operate, have a high availability and require little service and maintenance.
– Thermal conductivity of the cellulose insulating material = 0.040 W/mK
– Bulk densities of 20 – 30 kg/m3
– Injection densities (for instance in roof areas) of 30 – 35 kg/m3
– Capacities of 1,000 – 3,000 kg/h per production line are possible
For having one of these amazing German factories, contact us!